PROHALL 2X3M 500G GREY SMALL MACHINERY GARAGE

Small machine shed with a strong 500 g cover. Frame made of galvanized steel. Great storage cover for a snowmobile or ATV!
 

• Galvanized round tube (23 x 1 mm, 19 x 1mm)
• Material: PVC 500 g/m²
• Includes tarpaulin repair kit
• Color: gray (shade may differ from the picture)
• Shipment includes 2 boxes

External dimensions:

• Length: 305 cm
• Width: 205 cm
• Ridge height: 187 cm
• Wall height: 158 cm

Inner dimensions:

• Length: 300 cm
• Width: 200 cm
• Height in the middle: 185 cm
• Height of the door opening: 166 cm

Suitable spare cover: 101824415 Prohall 2 x 3 m 500g grey spare cover

NOTE!

• The stable is not supplied with fasteners.
• The person erecting the stable is responsible for purchasing fasteners that are suitable for the platform used and the stable structures, and that secure the stable in place. even in strong winds.
• Find out from a construction professional the appropriate fastening method for the installation site.
• The appropriate fastening method depends on the windiness of the installation site and the soil underneath.
• The dealers or importer are not responsible for insufficient fastening.

For winter use:

• The roof of the stable must always be kept clean. Make sure that any snow that has fallen does not remain on the roof of the stable.
• The stable cover must be tight. There must be no "bags" in the cover, especially in the upper parts of the stable.
• The stable roof stays cleaner when the cover is tight.
• Ensure that the frame of the stable is straight throughout. If the stable is built against the ground, there is a risk that the stable frame will not be straight and this will weaken the frame's durability.
• Under no circumstances should the roof of the stable be cleared of snow by pushing the cover from the inside. It can be life-threatening.
• Always empty from the outside using a tool that does not damage the cover.
• The warranty does not cover a shed that has collapsed due to a snow load.

For windy conditions:

• Choose a wind-protected location for the shed
• We do not recommend erecting the shed in particularly windy locations, such as on the banks of waterways or in open fields.
• The erection must be carried out with particular care and the tarpaulin must be tightened as much as possible.
• The frame must be fixed to the ground or substrate, for example with ground anchors or concrete pegs.
• In windy weather, ensure that the shed doors are closed.
• The warranty does not cover damage caused by strong winds or storms. stable.