RANCH 9.15X6X3.6M 900G EQUIPMENT HALL

• Dimensions (W x L x H): 6.1 x 9.15 x 3.66 m
• Door opening (W x H): 2.4 (door rolled up to the ridge height 3.66 m) x 4.88 m
• Cover: PVC 900 g/m²
• Tubes: Galvanized oval frame tubing, 40 x 70 x 1.5 mm, 42 x 1.2 mm
• Warranty: 12 months

NOTE!

• The person erecting the stable is responsible for purchasing fasteners suitable for the platform used and the stable structures, which ensure that the stable remains in place even in strong winds.
• Find out from a construction professional the appropriate fastening method for the installation location.
• The appropriate fastening method depends on the windiness of the installation location and the underlying soil.
• The dealers or importer are not responsible for inadequate fastening.

The press hall is intended for temporary use.
The press hall is suitable for temporary storage of a wide range of goods and machines, both from the weather and from outside views. Please pay attention to the instructions for use, especially in windy locations and for winter use. Before purchasing, check with the local building authorities whether a building permit or a notification of measures is required for a hall intended for temporary use in the installation location.

For winter use:

• The roof of the hall must always be kept clean. Make sure that the snow that has fallen does not remain on the roof of the stable.
• The stable cover must be tight. There must be no "bags" in the cover, especially in the upper parts of the stable.
• The stable roof stays clean better when the cover is tight.
• Make sure that the stable frame is straight throughout. If the stable is built against the ground, there is a risk that the stable frame will not be straight and this will weaken the frame's durability.
• Under no circumstances should the stable roof be cleared of snow by pushing the cover from the inside. It can be life-threatening.
• Always empty from the outside using a tool that does not damage the cover.
• The warranty does not cover a shed that has collapsed due to a snow load.

For windy conditions:

• Choose a wind-protected location for the shed
• We do not recommend erecting the shed in particularly windy locations, such as on the banks of waterways or in open fields.
• The erection must be carried out with particular care and the tarpaulin must be tightened as much as possible.
• The frame must be fixed to the ground or substrate, for example with ground anchors or concrete pegs.
• In windy weather, ensure that the shed doors are closed.
• The warranty does not cover damage caused by strong winds or storms. stables.

Note! the image is for reference only, not to scale