Heater with thermostat 2400 W Palram - Canopia

The Palram – Canopia greenhouse heater is equipped with a dual-function digital thermostat and works as both a heater and a fan.

With this heater, you can extend the growing season in your greenhouse both in spring and autumn. The digital thermostat takes care of the temperature accurately and does not let the heat drop too low. You can also increase ventilation in midsummer, as the dual-function thermostat can be set to start the device in ventilation mode when the temperature rises above the limit value.

The device has an IPX4 protection class, so it is splash-proof and will be your faithful servant for years to come. In addition to the greenhouse, you can find other uses for the heater in the house and garden, as well as in the summer cottage.

Features:
Power: 2400 W at full power
Blowing capacity: 233 m³/h
Digital dual-function thermostat switches on when the greenhouse is too cold or too hot
The thermostat has a separate temperature sensor on the 1.5 meter cable (sensor protection class IP65)
The device's protection class is IPX4, which means splash protection, but also a tight structure that prevents corrosion in greenhouse conditions.

The durable heating element is made of stainless steel
An automatic safety relay cuts off the power in case of possible overheating and restores the power when the device has cooled down
The low noise level allows comfortable working in the greenhouse even when the device is running
The heater power cord is 2 meters long, the thermostat connection cord is 2 meters long and the temperature sensor cord is 1.5 meters long
The ventilation function can be used to lower the temperature and humidity in the greenhouse in the summer
CE approval